- Laboratory Products
- Practice Requirements
- Furniture and Equipment
- Bandages, Dressings and Tapes
- ECG and Ultrasound
- Hospital Consumables
- Urological Products
- Emergency Products
- Mobility and Homecare
- Splinting Materials
Description for Virkon wipes
VIRKON-wipes for the quick and easy cleaning and disinfection of surfaces and medical products
VIRKON-wipes are dry non-woven wipes for wetting with VIRKON disinfectant solution.
VIRKON-wipes are made of high-quality, non-pilling, non-woven material. They release the disinfectant perfectly onto the surface to be disinfected.
VIRKON-wipes come in a refillable, resealable dispenser, especially conceived for this product.
VIRKON-wipes are particularly economical, as the solution only needs to be prepared once to effectively disinfect 35 or 70 times!
VIRKON-wipes effectively reduce the amount of disinfectant required.
The tightly sealing dispenser prevents contamination and evaporation of the VIRKON solution.
VIRKON-wipes are ideal for use in all medical establishments, such as hospital, care centres, doctor´s rooms, in the pharmaceutical industry, laboratories and the food industry or kitchen.
VIRKON-wipes STARTER SET
VIRKON concentrate tablet 10 x 5 g
(for 10 x 500 ml disinfectant solution)
VIRKON spray/dosage bottle
500 ml, empty
VIRKON-wipes non-woven wipes
Roll = 35 wipes
How it works:
Virkon-wipes clean and disinfect in one work step!
The Virkon wipes set allows the choice of disinfecting by simply wiping, or by spraying surfaces which are difficult to reach.
1 Fill the spray/dosage bottle with 500 ml of lukewarm water and add 1 Virkon concentrate tablet (1 tablet for 500 ml water and 35 wipes, 2 tablets for 1000 ml and 70 wipes) to create a pink disinfectant solution.
2 Remove the lid from the dispenser and insert a roll of the Virkon-wipes. Pull a wipe out of the middle of the roll and form a funnel with the wipe.
3 Pour the Virkon solution into the funnel in the middle of the roll to facilitate saturation through the entire roll of wipes
4 The wipes become saturated and get the pink colour of the solution.
5 Pull up the centre wipe, replace the lid onto the dispenser and place the wipe through the slit in the lid.
6 The lid may now be sealed completely.
7 Place the label onto the lid, entering the date the solution was prepared and the expiry date. After 5 days the solution is no longer disinfectant and loses it’s pink colouration.
8 The dispenser can be reused after cleaning or with Virkon.
Virkon is a biocide which fulfils the requirements set out under the Biocide-Guidelines 98/8/EG. Certification was granted through BAuA (the Federal Department for Occupational Health and Safety). The economical Surface-Disinfectant